泰亚旗下公司

东莞市泰亚电子科技有限公司 东莞市泰亚电子科技有限公司

Language
Chinese
English
CN / EN
MENU

Mobile Phone Electronics Field
New Energy Vehicle Field Energy Storage Field Rail Transit Field Mobile Phone Electronics Field Aerospace Field Industrial Equipment Field Outdoor Communication Field

Mobile Phone Electronics Field

With the rapid development of mobile phone electronics industry, the requirements for materials are getting higher and higher. Silicone materials have excellent properties and are widely used in the mobile phone electronics industry, such as TAIYALUCK high-performance silicone foam, viscoelastic silicone, polyurethane foam, etc.The materials can provide good sound insulation, shock absorption, sealing, and dust resistance, and improve the performance and service life of mobile phones. At the same time, silicone materials also have excellent electrical insulation properties, weather resistance and corrosion resistance, which can meet the high requirements of the mobile phone electronics industry. Therefore, the application background of silicone materials in the mobile phone electronics industry is very important, and it is of great significance to promote the development of mobile phone electronics industry.


Border bonding/cover fixing
Border bonding/cover fixing

TAIYALUCK double-sided tape has good initial tack and adhesion, high strength, good flexibility, and excellent wettability, weather resistance, water resistance and chemical resistance to the adhesive surface. It is mainly used for bonding and fixing of handheld device frames, back covers and other components, such as the bonding of foam, panels, structural parts and other materials, with high thermal conductivity and high insulation, which can effectively help electronic equipment dissipate heat and solve thermal management problems.


Anti-top print
Anti-top print

Mobile phones and other electronic devices are developing to the direction of lightening. For example, after the whole mobile phone is assembled, close contact with the inner explosion-proof film will lead to the deformation of the inner explosion-proof filmwhen the internal components of the mobile phone are convex or the surface of the components is uneven. The condition is easy to form a "top white"mark on the back cover of the mobile phone, which is called as"top print". The top printing phenomenon not only causes defects to the aesthetics of the mobile phone, but also affects the mechanical properties of explosion-proof film due to long-term force.

According to customer needs, TAIYALUCK’s R&D department has finally developed DY series products through many adjustments. DY series products are viscoelastic silicone materials, which are not only soft and compressible, sticky on their own surface, and can fill the gap, but also the creep performance can produce deformation under external force, dissolve stress, and achieve the effect of "soft marks".


Resonance relief
Resonance relief

At present, the development of thin and light handheld devices makes internal components closely arranged, therefore in the case of mobile phone ringing or vibration, it will cause components to friction and produce noise, in addition, if the speaker design is not reasonable, it will also interfere with the sound of sound cavity, resulting in an increase in amplitude, resonance, and noise. The resonancephenomenon of handheld equipment not only affects the service life of internal components, but also worsens the customer experience due to continuous vibration, and at the same time, it may produce noise pollution, which is harmful to the surrounding environment and human health.

In order to solve the phenomenon of resonance in handheld devices, TAIYALUCK has developed DS series products. DS series product is a kind of high damping viscoelastic silicone material, which is viscous and elastic. When the silica gel material receives vibration or noise transmitted by the outside world, it will producemovement of polymer chain or chain segment, through the intermolecular friction force during the movement, the mechanical energy will be dissipated in the form of heat energy, and then reduce the amplitude, thus achieving the purpose of vibration and noise reductio


LCD screen ripples/white spots elimination
LCD screen ripples/white spots elimination

Ripples/white spots are a common problem faced by LCD modules. Hand pressing, squeezing of back cables, and contact with the shell will cause short-term water ripples or permanent white spots. The traditional solution is to apply foam to the housing, so as to relieve compression or squeezing of the device. However, this solution is often difficult to isolate the cable from IC chip.

TAIYALUCK's new material adopts a foam micro-adhesive surface directly applied to the back of the LCD module, which can completely isolate the direct contact between the LCD and other devices, therefore the relief is more effective. At the same time, the micro-tack can ensure that repeated pasting will not tear and affect the backlight sheet. The products have excellent thickness retention and can maintain initial thickness during continuous extrusion, providing consistent performance.


Device waterproof seal
Device waterproof seal

AIYALUCK's high-performance silicone foam material shows excellent performance in the sealing application of mobile phone electronic devices. With excellent elasticity and sealing, it provides all-round protection for mobile phone electronic devices, effectively blocking the instrusion of moisture and dust.

The silicone foam is lightweight and durable, retains longevity and provides stable protection for internal components. In addition, the good cushioning performance effectively reduces the damage caused by accidental dropping of the device, which undoubtedly enhances the durability and reliability of the equipment, and brings users a more durable experience.


Display cushioning and shock absorption
Display cushioning and shock absorption

TAIYALUCK's high-performance silicone foam material is widely used as the cushioning material between the display and the body of electronic devices, such as mobile phones and tablets. The material is flexible and resilient to reduce stress on the display when it is impacted, protecting the screen from damage. At the same time, it also has excellent thermal conductivity, which can help disperse and process the heat generated by the display.


Related Products

Service Hotline
Follow Us
Video

Sitemap|Contacts

粤ICP备2020116610号

Copyright © 2023 Dongguan TAIYALUCK Electronic Technology Co., Ltd.

Subsidiary company: Dongguan Taiyaluck Electronic Technology Co., Ltd. DSIC Technology (Dongguan) Co., Ltd Zhuzhou Taixin Electronic Technology Co., Ltd Dongguan Guangmai Electronic Technology Co., Ltd Dongguan guangya New Materials Co., Ltd

Administration

86-0769-83065185

After Sales

86-0769-89793287

Pre-Sales

13794909908

Follow Us

关注视频号