泰亚旗下公司
Language
Chinese
English
CN / EN
MENU

New Energy Vehicle Field

New Energy Vehicle Field Energy Storage Field Rail Transit Field Mobile Phone Electronics Field Aerospace Field Industrial Equipment Field Outdoor Communication Field

New Energy Vehicle Field

Silicone materials are increasingly used in the new energy vehicle industry. With the increasingly serious energy shortage and environmental pollution caused by traditional fuel vehicles, new energy vehicles have become the mainstream trend in the future. Silicone materials such as TAIYALUCK high-performance silicone foam provide excellent solutions for the new energy vehicle industry, meeting or exceeding the safety specifications and industry standards of new energy vehicles. The application of these materials in power battery packs has improved the safety, reliability and environmental performance of batteries, thus providing strong support for the development of new energy vehicles, and promoted the rapid development of the new energy vehicle industry.


Battery Pack Sealing
Battery Pack Sealing
Battery Pack Sealing | IPX8 Silicone Foam | Meets IP67 Enclosure Requirements

Sealing decides whether a pack is still safe after years of rain, wading, and dust. GB 38031 requires at least IP67 enclosure protection, and a failed seal leads to water ingress and short circuits. TAIYALUCK silicone foam seals to IPX8 and above, combining water, moisture, dust, and fire protection with no leakage, and it survives repeated service openings. Anchor: Battery Pack Sealing Solutions.


Battery Cell Thermal Insulation
Battery Cell Thermal Insulation
Battery Cell Thermal Barriers | Flame-Retardant Silicone | Slows Runaway Propagation

The gap between cells is where runaway spreads sideways, so barrier performance sets the safety rating of the pack. TAIYALUCK open-cell silicone foam forms a custom insulating layer that is UL94 V-0 rated, withstands 1,000 °C flame, and damps vibration in the same material. Anchor: Battery Cell-to-Cell Thermal Barrier Solutions.


Battery Cell Cushioning
Battery Cell Cushioning
Battery Cell Cushioning | Ultra-Soft Silicone Foam | Absorbs Pouch Cell Swelling

Pouch cells swell on every cycle, and rigid clamping cracks the aluminum laminate and wears the cell stack. TAIYALUCK TS ultra-soft silicone foam needs only about 30 kPa at 25% compression and can be as thin as 0.6 mm, so it deforms before the cell does and keeps closing force low across the pack’s life. Anchor: Battery Cell-to-Cell Cushioning Solutions.


Battery Cell Formation Cushioning
Battery Cell Formation Cushioning
Battery Formation Cushioning | TH Silicone Foam Pads | Locating, Damping, Swell Absorption

Volume change and mechanical stress during formation and charge–discharge directly affect module consistency and cycle life. TAIYALUCK TH silicone foam brings high hardness, toughness, and flame retardance into locating pads and closed-frame gaskets that absorb heat and pressure and limit over-expansion. Anchor: Battery Cell Formation Cushioning Solutions.


Battery Pack Thermal Runaway Protection
Battery Pack Thermal Runaway Protection
Battery Pack Thermal Runaway Protection | Ceramifiable Silicone | 1,000 °C Without Burn-Through

Vented gas and flame from a failing cell can breach the pack cover and release flame outside the pack. TAIYALUCK ceramifiable solid silicone withstands 1,000 °C continuously and a 3,000 °C oxy-acetylene flame for 30 seconds; above 600 °C it sinters into a ceramic support that blocks the jet, helping packs meet GB 38031 propagation requirements. Anchor: Battery Pack Thermal Runaway Protection Solutions.


Battery Cooling Plate Support
Battery Cooling Plate Support
Battery Cold Plate Support | Lightweight Compression-Resistant Foam | Consistent Heat Transfer

A support pad that takes a compression set lowers contact pressure on the cold plate, and cooling consistency fades as the pack ages. TAIYALUCK cooling plate foam uses a high-toughness cellular structure that acts like a spring in tight spaces, holding thermal contact and damping road vibration at the same time. Anchor: Battery Pack Cooling Plate Support Solutions.


Battery Pack Underbody Protection
Battery Pack Underbody Protection
Battery Thermal Management | Pads, Potting, Gels, Grease | Eliminates Hot Spots

Uneven module temperature accelerates local aging and can trigger runaway. TAIYALUCK gap pads, potting compounds, thermal gels, and silicone grease move heat out of the cells and hold temperature uniformity, slowing aging and extending pack life. Anchor: Battery Pack Thermal Conduction Solutions.


Battery Thermal Management
Battery Thermal Management
Battery Thermal Management | Pads, Potting, Gels, Grease | Eliminates Hot Spots

Uneven module temperature accelerates local aging and can trigger runaway. TAIYALUCK gap pads, potting compounds, thermal gels, and silicone grease move heat out of the cells and hold temperature uniformity, slowing aging and extending pack life. Anchor: Battery Pack Thermal Conduction Solutions.


Battery Pack Structural Bonding
Battery Pack Structural Bonding
Battery Structural Bonding | Thermal, Sealing and Structural Adhesives | Module-to-Pack Integration

Integrating modules into a pack means combining thermal, sealing, locating, insulating, conductive, and structural functions in one build step. TAIYALUCK selects and combines functional adhesives to raise system safety, stability, and heat transfer for EV and energy-storage assembly. Anchor: Battery Pack Structural Bonding Solutions.


Related Products

Service Hotline
Follow Us
Video

Sitemap|Contacts

粤ICP备2020116610号

Copyright © 2026 Dongguan Taiya Electronics Technology Co., Ltd.

Subsidiary company: Dongguan Taiya Electronics Technology Co., Ltd. DSIC Technology (Dongguan) Co., Ltd Zhuzhou Taixin Electronic Technology Co., Ltd Dongguan Guangmai Electronic Technology Co., Ltd Dongguan guangya New Materials Co., Ltd

Email

vip@taiya.cn

Follow Us

关注视频号